Attach Label (Zipper Pull) Step 1Thread Clip through Loop Thread the metal clip from the ID Making Kit through the loop at the top of the silicon cover. Step 2Insert GoID into Cover Insert the metal ID into the opening at the bottom of the silicon cover. Push firmly until the round portion of your metal ID is entirely within the silicon cover, leaving only the metal tab exposed. Step 3Attach to Zipper Pull Attach to your zipper pull using the metal clip. The metal clip is to attach the ID to your zipper pull, not act AS the zipper pull. Pulling on the ID — rather than on the zipper pull itself — could cause the silicon loop to break. Step 4Enjoy! Be safe. Have fun. Go ANYWHERE! Return to Wizard